Thermal Solar Goes Where PVs Can’t

Energy storage sparks a concentrating-solar boom

4 min read
Thermal Solar Goes Where PVs Can’t
Solarflux

Global solar energy supplies are growing rapidly, with nearly 10 times as much solar capacity installed today as there was a decade ago. Leading the boom is the photovoltaic (PV) panel, which converts sunlight into electricity using semiconductors. But even as the glossy rectangles become increasingly cheaper and ubiquitous, solar PV alone can't solve the nagging question: What to do when the sun isn't shining? As electric utilities and policymakers seek solutions for storing and dispatching energy on demand, concentrating solar-thermal power (CSP) is once again gaining traction.

Solar-thermal systems use sun-tracking mirrors to reflect sunlight onto a receiver, which contains a high-temperature fluid that stores heat. The heat can drive steam turbines or engines to generate electricity around the clock. Or, solar thermal can directly provide heat for industrial processes to make steel, cement, and chemicals—all energy-intensive sectors that are difficult to clean up. With U.S. states and countries adopting measures to curb greenhouse gas emissions, now "might be the right time for CSP to become more broadly applicable," said Margaret Gordon, the CSP program manager at Sandia National Laboratories in Albuquerque, N.M.

The first utility-scale solar-thermal plants were built in the 1980s. Today, nearly 120 projects operate worldwide, and Spain claims more than a third of total installed capacity. In recent years, however, CSP development stalled amid the rapidly falling cost of solar PV. Massive solar-thermal arrays require steep upfront investment. Unlike solar PV, the mirrors, heat exchangers, and other key components aren't yet "off-the-shelf" ready, which adds time and expense to project development, Gordon said. Even so, solar-thermal developments continue to unfurl across the planet's sunniest expanses, driven by the growing demand for energy storage and cleaner heat sources. IEEE Spectrumlooked at four new solar-thermal projects—each representing a different CSP technology—that are curbing emissions by harnessing the sun's heat.

Power Tower

Image of the Cerro Dominador thermal power tower.

Cerro Dominador

Cerro Dominator:100-MW solar-thermal power tower + 100-MW solar PV plant.
Atacama Desert, Chile

The US $1.4 billion project began full operations in June. The 700-hectare complex has 10,600 mirrors (or "heliostats") that direct sunlight to a 252-meter-tall tower. Inside the tower, molten salts are heated to 565 °C and flow down into storage tanks, turning water into steam to drive turbines. The closed-loop system has a record 17.5-hour thermal storage capacity, allowing operators to provide electricity 24/7.

"It's flexible. It's like a big battery of molten salt instead of lithium," said Fernando Gonzalez, CEO of Cerro Dominador.

Bottom line: Among CSP, molten-salt power towers have the greatest cost-reduction potential, thanks to higher operating temperatures and improved efficiencies, according to the International Renewable Energy Agency (IRENA).

Parabolic Dish Concentrator

Image of the Solarflux Focus dish.

Solarflux

Solarflux Focus: 10-kW prototype dish.
Pennsylvania, United States

Solarflux's prototype unit is a simplified, lower-cost version of a decades-old concept, operating at Pennsylvania State University's campus in Berks County. Polished aluminum petals cover a 14-square-meter aperture, beaming sunlight onto a receiver at the focal point. The Focus dish is mounted on a dual-axis tracking system, so it's always facing the sun. The receiver transfers heat to an engine or generator and, depending on the heat transfer fluid, can deliver thermal energy of up to 600 °C, the company claims. A 30-kilowatt, 42-square-meter aperture production unit is in development.

Bottom line: Focus may be best suited for "distributed thermal" applications, with one or dozens of dishes directly providing heat to factories, wastewater treatment plants, or desalination facilities, said Naoise Irwin, CEO of Solarflux.

Linear Fresnel

Image of the Fresnel project in China.

Zhang Xiaoliang/VCG/Getty Images

Lanzhou Dunhuang Dacheng: 50-MW Fresnel project.
Dunhuang, China

Built in an industrial park in Northwest China, this project began commercial operations in June 2020. Flat reflective panels are arranged like the stepped lenses of a lighthouse lamp (which typically also uses a Fresnel lens), concentrating sunlight on a loop of overhead pipes. Panels are oriented north-south to track the sun. In a first for commercial Fresnel projects, this installation uses molten salts—not thermal oil—in the pipes. The fluid heats to above 535 °C and flows to a steam turbine or into two molten-salt storage tanks, with a total thermal storage capacity of 15 hours.

Bottom line: Linear Fresnel hasn't yet scaled to the level of towers or troughs, partly due to lower power-cycle efficiencies and higher electricity production costs, says Ken Armijo, a mechanical engineer at Sandia, which previously operated a molten-salt Fresnel test loop facility in Albuquerque.

Parabolic Trough

Image of the Noor Energy parabolic trough system.

ACWA Power

Noor Energy 1: 600-MW total parabolic trough system + 100-MW power tower + 250-MW solar PV plant.
Dubai, United Arab Emirates

The massive US $4.4 billion complex includes three 200-MW parabolic trough arrays, the first of which will begin commissioning this year. Each unit includes 2,120 mirrored modules, which concentrate the sun's energy onto an absorber tube placed at each module's focal point. A low-viscosity oil in the absorber tubes rises to 393 °C, then flows into the power block. From there, the heat-transfer fluid is used to drive steam turbines, or it's sent to molten-salt thermal energy storage tanks—each with a 12-hour thermal storage capacity. When completed in late 2022, Noor Energy 1 will be the world's largest CSP project.

Bottom line: Parabolic trough systems are considered the most mature and (for now) lowest-cost CSP technology. In 2020, troughs made up two-thirds of the global installed CSP capacity.

The Conversation (3)
Christopher Aoki
Christopher Aoki10 Apr, 2022
AF

On the subject of thermal energy storage, here's an item of potential help

to the renewables industry from an unexpected source:

Article: "Nuclear research leads to breakthrough in grid-scale storage of solar and wind energy"

URL: https://www.seaborg.com/press-release-hyme

Seaborg Technology, a Danish molten salt reactor company, developed a method for

controlling corrosion problems associated with sodium hydroxide (a.k.a. "Drano")

as a molten salt. Recognizing that this technology could also be useful for storing

thermal energy in concentrated-solar systems, they spun it off as a separate

subsidiary company ("The name Hyme is a contraction of Hydroxide and to melt.").

Read the press release for more information.

Anjan Saha
Anjan Saha29 Oct, 2021
M

Concentrated Solar beam through concave

Reflective mirrors will increase solar insolation on PV panels, thus increasing the output of

SPV module. But thermal heating of SPV panels decreases the efficiency of Solar Cell Modules which need to be cooled by Cooling circuit.

Concentrated Solar Thermal power using proper Heat Exchanger like Acohol in the primary circuit and DM water in the secondary circuit can generate Steam for power plants

or for various processing industries like petrochemicals , food processing , dying also for

Hotel,Restaurant and Residential complexes .

The problem of killing birds by concentrated solar beam can be avoided by

Installation of Decoy Soldiers or fluttering Flags.

Considering the huge benefits of concentrated Solar beam for environmental benefits

and energy conservation, We should go for Solar with

little disadvantage.

Joshua Stern
Joshua Stern27 Oct, 2021
LM

Tower is dangerous, birds get fried flying through beams they can't see, and it must also radiate a lot of heat, why don't they break it into a dozen local targets with much less intense beams, guide the beams to a common underground target that captures the heat radiated in the big one, or else just duplicate the storage/generation facilities in a dozen/systolic pieces? Similarly the trough idea seems the most scalable, but have to find the right scale factors. I think the radiative aspect is under-managed there, too.