Sharpening focus in quantum photolithography

A new protocol makes it possible to improve the accuracy of photolithography by addressing its physical limitations Photolithography uses light beams to design thin geometric patterns on the substrates of semiconductors used in microelectronic devices. This is achieved using a…

A new protocol makes it possible to improve the accuracy of photolithography by addressing its physical limitations

Photolithography uses light beams to design thin geometric patterns on the substrates of semiconductors used in microelectronic devices. This is achieved using a chemical reaction on a light-sensitive chemical, called photoresist. The trouble is that the phenomenon of light diffraction does not permit highly accurate patterns. Often, the edges of stripes have low contrast, and the distances between the stripes and the stripes’ width are limited by what is referred to as Rayleigh’s diffraction limit.
Now, a scientist from Russia has developed a quantum lithography protocol designed to improve the resolution of this technology. The findings of George Miroshnichenko, a physicist at Saint Petersburg National Research University of Information Technologies, Mechanics and Optics, have just been published in EPJ D.
Until now, quantum lithograph protocols have been based on multi-photon absorption. This means that the frequency of the incoming light needed to be several times smaller than the frequency required for the absorption of a single photon, to trigger the absorption of multiple photons by the photoresist. As a result, this approach requires a higher wavelength, and produces lower resolution.
Instead, Miroshnichenko establishes the formula for the probability of a single — and no longer multiple — photon transition from a bound state of a quantum system to a state of continuous spectrum, using the so-called Markov approximation. This makes it possible to select the exposure time and the beam’s intensity to obtain a narrow stripe in the photoresist on the substrate. Thus, in negative photoresist, this protocol can be used to create a stripe with a width equal to half the wavelength and high-contrast edges. For positive photoresist, thin stripes can be formed on the substrate with a width that is substantially smaller than the wavelength, but the distance between these stripes is equal to half the wavelength.

Share this story on Facebook, Twitter, and Google:

Other social bookmarking and sharing tools:

Story Source:

The above story is based on materials provided by Springer.
Note: Materials may be edited for content and length. For further information, please contact the source cited above.

Journal Reference:
G. P. Miroshnichenko. Quantum lithography on bound-free transitions. The European Physical Journal D, 2013; 67 (12) DOI: 10.1140/epjd/e2013-40586-2

Note: If no author is given, the source is cited instead.

Search ScienceDaily
Number of stories in archives: 148,682

 

Interested in ad-free access? If you’d like to read ScienceDaily without ads, let us know!

  more breaking science news

Social Networks
Follow ScienceDaily on Facebook, Twitter, and Google:

Recommend ScienceDaily on Facebook, Twitter, and Google +1:

Other social bookmarking and sharing tools:

Breaking News
… from NewsDaily.com

more science news
In Other News …
more top news
Science Video News

Brain’s Puberty Switch
Researchers have discovered the precise chemical chain reaction that could be the much-sought-after puberty trigger: The KiSS-1 gene, which produces. …  > full story

Strange Science News
 

Free Subscriptions
… from ScienceDaily

Get the latest science news with our free email newsletters, updated daily and weekly. Or view hourly updated newsfeeds in your RSS reader:
Email Newsletters
RSS Newsfeeds
Feedback
… we want to hear from you!

Tell us what you think of ScienceDaily — we welcome both positive and negative comments. Have any problems using the site? Questions?
Leave Feedback